HN series centrifugal fans are high-pressure units with aluminium alloy impellers, designed for industrial applications requiring high pressures with medium-to-low flow rates. With over 140 available sizes — from HN 01 to HN 167 double stage — they cover an operating range unmatched by any other product in the SAVIO range. Available in ATEX version.
THE ALUMINIUM IMPELLER ADVANTAGE:
The aluminium alloy impeller ensures reduced inertia compared to traditional steel impellers. The practical result: low starting torque, fast start-up, less motor stress at each start cycle and reduced energy consumption. A decisive advantage in applications with frequent start-ups — such as bag filters, intermittent pneumatic conveying and air slides in cement plants.
FLUID:
Suitable for clean or slightly dusty air, technical gases and fluids compatible with aluminium. Up to standard operating temperatures; special stainless steel executions are available for high-temperature or chemically aggressive fluids. Guaranteed operation down to zero flow rate, without surging phenomena.
Main data
- Over 140 sizes, from HN 01 to HN 167
- Pressure up to 1,800 mmWG (approx. 176 mbar) single stage and 3,200 mmWG (approx. 314 mbar) double stage
- Flow rates up to 10,000 m³/h
- No surging: stable operation down to zero flow rate
- Direct drive with coupling or belt and pulley drive, 16 standardized discharge positions
The range
The models are organized into groups: within each group, pressure and power increase. The model selection is based on performance curves; belt drives optimize the operating point, as flow rate varies with speed, pressure with its square, and power with its cube.
| Group | Absorbed power at reference point [kW] |
|---|---|
| HN 01 – 09 | 0.3 – 2.3 |
| HN 10 – 19 | 0.33 – 3.5 |
| HN 20 – 29 | 0.44 – 4.6 |
| HN 30 – 39 | 0.5 – 6 |
| HN 40 – 49 | 0.66 – 7.2 |
| HN 50 – 59 | 0.9 – 10.2 |
| HN 60 – 69 | 1.2 – 13 |
| HN 70 – 79 | 1.4 – 17.2 |
| HN 80 – 89 | 2.1 – 20.5 |
| HN 90 – 99 | 2.6 – 25.4 |
| HN 100 – 109 | 2.8 – 28.6 |
| HN 110 – 119 | 3.75 – 32.8 |
| HN 150 – 157 | 5 – 39 |
| HN 160 – 167 | 6.7 – 50 |
Construction
- Steel casing and frame, particularly robust
- Aluminium impeller, statically and dynamically balanced
Special Executions
- Seal: simple or reinforced with stuffing box, with or without leak recovery
- Anti-corrosion: stainless steel or titanium construction, galvanizing, special paints and coatings
- High temperature: cooling impeller, heat-resistant steel construction
- ATEX for explosive atmospheres
- Soundproofing: silencers and acoustic cabins sized for the fan
Accessories
Circular discharge flanges · inlet and discharge counter-flanges · inlet protection grid · flexible connectors · casing drain · inlet filters.
TYPICAL APPLICATIONS — CEMENT PLANTS:
In cement plants, where dozens of process points require high-pressure air with medium flow rates, the HN series is the standardized, off-the-shelf solution: air slides (for raw meal and finished cement), dense phase pneumatic conveying (raw meal, clinker, cement between silos and mills), primary air for kiln burners, bag filter pulse-jet cleaning air, ventilation and HVAC for technical rooms. Documented supplies to international cement groups.
OTHER SECTORS:
Ceramics and bricks (atomized transport, process air), chemical and petrochemical industry (stainless steel ATEX versions), foundries (combustion air), food industry, water treatment, basin aeration, paper industry, tunnel and parking lot ventilation.


Do you have a specific application?
Our technical department is at your disposal to select the HN model best suited to your application — from the operating point to delivery.
Applications in cement plants: discover how the HN series is used in air slides, pneumatic conveying and combustion air →